|
To insert a gap in a drawing, right click any survey line or line label and choose Gap. The line and any associated labels will disappear from the drawing.
Using the GAP Point Type
TPC uses a Gap point to create a line break in a traverse. No line is drawn between the traverse point points above and below the Gap point. The gap affects all the drawings that include the traverse so that the lines and labels are not drawn in any of the drawings.
In the following point sequence, no line would be drawn between points 2 and 3 because of the Gap point.
1 2 Gap 3 4
This sequence might draw a line like 1------2 3--------4. Neither the line nor the line labels are created from 2 to 3.
Creating a Gap to a Traverse
In the Traverse View, position the cursor on the point you want to insert a gap prior to and choose Edit, Create Gap in Drawing.
TPC inserts a Gap point above the selected point and hides the line and label between those two points in the drawing and every other drawing that uses that traverse.
Creating a Gap in a Drawing
In any drawing, right-click any survey line or line label and choose Gap. TPC inserts a Gap point into the traverse that drew that object forcing the line and its associated labels disappear from the drawing.
Hiding Survey Objects
If you want to hide a single or just a few lines and labels in a drawing, you can just Hide them. This can create the same end result as inserting a gap in the drawing.
Related Topics
Gap Point Type Inserting a Gap in a Drawing
Editions
Personal, Premium, Professional
|