If you have not yet worked with stationing in any of the traverses, your traverses will all start with the default station 0+00. This will determine the left-most station value in the profile. If you have specified a starting station other than 0+00, that station will be the left most station in the profile. Remember, the profiles plot stationing on the X-axis and elevation on the Y-axis.
To turn on stationing in a traverse
•Double-click the traverse name in Traverses Manager to open the Traverse View.
•If your Traverse View does not include the Station column,
•Choose View | Format View.
•Include the letter N in the Display Sequence and choose OK. The Traverse View will now display the current stationing of each control point in the traverse. These are the station values used in the profile.