If you don't want survey lines drawn through your point symbols, TPC can trim them out for you.
Trimming Point Symbols (3:38) - Trim lines going into point symbols or clear the background around the symbols. Either way, your drawing looks better.
Using Traverse Drawing Settings
In the Control Points and Side Shots dialogs, turn on [x] Trim Symbols.
TPC computes the endings of lines, arcs and spirals so they end at the symbol boundary.
Survey Information vs Line Length
Because TPC gets its survey data from the survey, not the drawing, a trimmed line is still the same length when reported in a tool tip or the Drawing Data Manager. However, the line in the drawing is now trimmed and is therefore shorter than the survey line.
If you export this drawing to CAD, the trimmed line will be exported and will therefore be shorter than the survey line.
Using Background Clearing
To turn on background clearing,
•Choose Tools | Drawing Settings.
•Select the Background Clearing tab.
•Turn on [x] Point Symbols
Background clearing is the convention that CAD programs use to trim lines and TPC supports this convention to be compatible with them.
Using this method, TPC draws the survey line layer first then draws the point symbols layer. TPC also creates a temporary drawing object behind each symbol and fills it with the background color. The result is point symbol clearing without changing any line lengths.