TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing in TPC - It's Not CAD > Drawing Traverses > Point Symbols >

Adding Point Symbols

 

 

 

 

When you edit Drawing Settings, Traverse Drawing Settings and point symbols, TPC displays a point symbol list in the dialogs. This is a list of commonly used symbols. Many of the symbols come in pairs with one symbol indicating a found feature and a second symbol indicating a set or proposed feature.

 

Adding Point Symbols (2:27) - Add your own point symbols to use in the Traverse Drawing Settings.


Adding Symbols Manually

You can add symbols manually using any text word processor and following the syntax outlined in Point Symbol Defintions.

The symbols you add can be anywhere on a shared drive, but are commonly placed in the \Blocks\ folder with other shared data.  See Sharing Program Data.

Example

In this example, the KLS survey company has added their commonly used symbols to a \KLS category in the UserSymbols.dat file, accessed from a shared drive for the company.

The /KLS category can be moved to any position in the UserSymbols.dat file or left near the end of that file as shown here (categories are displayed in the drop-down symbol lists in the order they are read from the UserSymbols.dat file). See Using Categories.

/KLS

point symbols\kls-set,SET A 5/8" X 30" IRON ROD WITH A Y.P.C. MARKED "KLS SURVEYING INC.",,,

point symbols\kls_e_quarter,KLS EAST 1/4 CORNER,,,

kls symbols\pcor,PCOR,,,

point symbols\kls_w_quarter,KLS WEST QUARTE CORNER,,,

kls symbols\kls cal wquareter,KLS CALC W 1/4,,,

trees\cg_t18,CG T18,,,

point symbols\kls_seccor,KLS SECTION CORNER,,,

point symbols\kls_n_quarter,KLS NORTH QUARTER CORNER,,,

point symbols\kls-found,FOUND MONUMENT AS NOTED,,,

 


Browsing Symbols

If you need a symbol that is not on the list, you can add it to the list with the Browse button located next to the list.

•Choose Browse, and then navigate to the folder that contains the block (symbol) you want to add to the list.

•Double click the block or highlight it and choose Open.

The symbol you selected is added to the symbol list and sorted by its name. Any drawing in the survey can now access this symbol by selecting it from the point symbol list.

Categories

If you currently have categories displayed in the drop-down symbol list, TPC will add the browsed symbol to the current category.  See Using Categories.

Using this method, you can easily build out your categories with browsed symbols.

UserSymbols.dat

As you add symbols via Browse, TPC appends them to the end of the UserSymbols.dat file. 

In the example shown here, the E16 CAP symbol was added to the PLSS category and TPC appended it to the end of the UserSymbols.dat, preceded by it's category name.

/PLSS

corners\e16 cap,E16 CAP,

 


Opening a Survey

When you save a survey, TPC stores a list of any user point symbols used in that survey (IDs >= 500) and includes their symbol name and DXF file.

When you open that survey, TPC reconciles that list of user symbols with the user symbols in your UserSymbols.dat file, that are currently available to TPC Desktop.  Any new symbols used by the survey are appended to your UserSymbols.dat file

ID vs Unique ID (just for that survey)

Point symbols saved with a survey file can have a unique ID used only for that survey.  These are the IDs used to reference a symbol everywhere that symbol is used in that survey.  This ID does not need to match the IDs that may be use in the UserSymbols.dat file or other survey files.

TPC is able to update these unique ID's to their corresponding symbols so that the next time the survey is saved, it can be saved with the updated symbol IDs.  This process is repeated every time a survey is saved and opened.

Reconciling Symbol Names

If you edit user symbols names in the UserSymbols.dat file, the symbol name stored in an older survey file will not match the edited symbol name for that same symbol.

If TPC can find an existing user symbol that references the same dxf symbol file, the existing symbol and its name will be used.  If not, the unique survey symbol will be added to TPC's symbol list and UserSymbols.dat file.

In the example shown below, TPC encountered a symbol named KLS EAST 1/4 CORNER when opening a survey file, but that symbol already existed with the name EAST 1/4 CORNER. Because they share the same filename, TPC resolved the conflict by retaining it's original name for that point symbol. You can decide whether or not to change the name of that symbol in the UserSymbols.dat file.

Warning: Retaining the name: EAST 1/4 CORNER for symbol: KLS EAST 1/4 CORNER (504).

     Shared file: C:\PROGRAMDATA\TRAVERSE PC\TPC DESKTOP 2024\BLOCKS\POINT SYMBOLS\KLS_E_QUARTER.DXF

 

Unique Symbol IDs Syntax

In any survey (TRV) file, the point symbols used in that survey are stored in a section that begins with #,User Symbols.

In the example shown here, five (5) unique user symbols are stored with this survey, with IDs 500, 501, 502, 504 and 508.  These symbols will be reconciled to existing survey symbols when the survey is opened.

#,User Symbols

27,10,500,KLS SECTION CORNER,POINT SYMBOLS\KLS_SECCOR.DXF,-68.053,68.414,68.457,-68.086,0,184549376l

29,0,6

27,10,501,KLS NORTH QUARTER CORNER,POINT SYMBOLS\KLS_N_QUARTER.DXF,-66.692,9.025,66.851,-8.975,0,184549376l

29,0,6

27,10,502,FOUND MONUMENT AS NOTED,POINT SYMBOLS\KLS-FOUND.DXF,-7.476,7.435,7.435,-7.451,0,184549376l

29,0,6

27,10,504,SET A 5/8" X 30" IRON ROD WITH A Y.P.C. MARKED "KLS SURVEYING INC.",POINT SYMBOLS\KLS-SET.DXF,-5.024,5.183,4.976,-4.817,0,167772160l

29,0,6

27,10,508,WEST 1/4 CORNER,POINT SYMBOLS\KLS_W_QUARTER.DXF,-0.060,0.445,0.066,-0.445,0,184549376l

29,0,6

 

In the UserSymbols.dat file, these will look something like this

 

/Un-Assigned

point symbols\kls_seccor.dxf,KLS SECTION CORNER,,,

point symbols\kls_n_quarter.dxf,KLS NORTH QUARTER CORNER,,,

point symbols\kls-found.dxf,FOUND MONUMENT AS NOTED,,,

point symbols\kls-set.dxf,SET A 5/8" X 30" IRON ROD WITH A Y.P.C. MARKED "KLS SURVEYING INC.",,,

point symbols\kls_w_quarter.dxf,KLS WEST QUARTE CORNER,,,

 


Sharing Added Point Symbols

When symbols are appended to the UserSymbols.dat file through the options discussed above, they are not available to other TPC users until they re-start TPC.  TPC only reads the shared UserSymbol.dat when it is started.

If two or more users append the same symbol while running TPC concurrently, TPC can easily identify them as duplicates and resolve them to a singe symbol.

Example

In this example, two TPC users have added the same symbol while running TPC concurrently. The next time TPC is restarted, it will resolve this to a single E16 CAP symbol in the Un-Assigned category.

The second TPC user added the same symbol to the PLSS category, but they symbol will be left in the Un-Assigned category because that category is first in the UserSymbols.dat file.

/Un-Assigned

corners\e16 cap,E16 CAP,,,

 

/PLSS

corners\e16 cap,E16 CAP,,,

 


Related Topics

Point Symbols
Overriding Point Symbols
Trimming Symbols
Smart Drawing Objects
Working with Drawing Objects
Using Categories

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.