TPC 2026
TPC 2026

 

 

Navigation: Traverses > Ground Traversing > Starting a Ground Traverse >

Starting with an Occupied Point

 

 

 

 

A new traverse always starts with an occupied point (OP). The next available point number greater than 0 is used to label the OP.

The information you enter at the start of a traverse depends on the type of survey you are doing and the information you have, but you will typically either recall an existing point or enter the starting coordinates.


Starting with an occupied point that already exists in the current survey

•Move the cursor to the Point column.

•Type the point label of the point you want to recall and press [Enter]. This brings up the existing point dialog. The ‘Recall the existing point and its coordinates’ option is checked.

•Press [Enter] again to recall the point.

The coordinates and description of the recalled point will be displayed in the Traverse View.


Starting with an occupied point that doesn’t already exist in the survey

•Press the right arrow key to move the cursor to one of the coordinate fields (Northing, Easting, Elevation). If they are not displayed, you may need to scroll to the right. Choose View | Format View (or press [F9]) and add the letters YXZ (Y=Northing, X=Easting, Z=Elevation) to the Display Sequence and then choose OK.

•For each coordinate value, type the number and press [Enter].


Starting with assumed coordinates

If you don’t know the coordinates of the occupied point, don’t enter any. TPC will assume coordinates of zero. Later, when you find out the coordinates, just enter them and choose Tools | Recompute. TPC will update the position of all the dependent points in the traverse.


Related Topics

Traverse View
Entering Traverse Data
Ground Traversing

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.