|
Distance Types are available in the Traverse View | Format View, Advanced tab. You can choose a coordinate distance type or a geodetic distance type from the Distance pulldown.
In the Traverse View, the distance type relates the distances displayed to the coordinates of the points.
For example, if your coordinates are on a UTM grid per the Coordinate Reference System (CRS) you selected for your survey and you want to show ground distance in the Traverse View, select one of the Ground Dist options to convert inversed grid distances between coordinates to the ground distances displayed.
Conversions Go Both Ways
You can think of distance types as affecting the conversion of distances both ways - 1) computing coordinates and 2) inversing coordinates.
Computing Coordinates
You enter raw data into the Traverse View that matches the distance type selected. So if you have selected a Ground Distance type, you enter ground distances into the traverse and TPC converts them to grid distance for any computations it does to compute coordinates.
Inversing Coordinates
When TPC displays a distance in the Traverse View and Raw Data Mode is not selected, it converts the grid distances in computes (inverses) between coordinates to the distance type selected for the Traverse View.
Assigned to the Traverse View, not the Traverse
The distance type you select for a Traverse View is assigned to that view, but not the traverse. So you can easily display ground distance for a traverse in one Traverse View and grid distances for that same traverse in a different Traverse View.
You can also display ground distance in a Traverse View then switch that same Traverse View to display grid distances. Be careful with this because when you recompute the traverse, it will use the current distance type to recompute the coordinates.
Abbreviations Used in Traverse View
The Traverse Views uses the following abbreviations for distance column headings.
Grid Dist - inversed grid distance between coordinates Ground Dist - inversed grid distance between coordinates scaled to ground distance Geo Dist - geodesic distance between two geodetic positions either on the ellipsoid surface or scaled to ground distance
Coordinate Distances
Coordinate distance types like Grid Distance and Ground Distance (at project elevation) are based on Cartesian coordinates, scale factors and elevation factors.
When you enter a distance in a Traverse View, TPC looks at the traverse format to determine what type of coordinate distance you are entering, reduces the distance to the corresponding grid distance, then computes the grid coordinates of the foresight.
When you recall two points and display the coordinate distance between them, TPC first inverses the grid distance between the two points then scales the distance to distance type being displayed in the view.
Geodetic Distances
Premium and Professional Editions (only)
When you enter a geodetic distance in a Traverse View, TPC looks at the traverse format to determine what type of geodetic distance you are entering and scales the distance appropriately before computing the foresight.
For example, if you have selected the Geodetic Distance (project elevation = 2,500) as the geodetic distance type for a traverse, TPC will multiply any geodetic (ground) distance you enter by the the appropriate elevation factor to reduce that distance to an equivalent distance on the ellipsoid surface, then TPC will computes the geodetic position (geodetic direct) for the foresight on the ellipsoid surface.
When you recall two points, TPC makes sure it has geodetic positions for the two points then computes the geodesic between then and scales it to the distance type displayed in the view.
Slope Distance
If you enter a slope distance, the slope distance will first be converted to the equivalent horizontal distance. Depending on the distance type you selected, this can be a coordinate distance or a geodesic distance. It is this horizontal equivalent that is then used to compute the foresight.
Vertical Distance
Vertical distance is independent of ground distance scaling. It is simply the difference between the elevation of two points either in survey units or factored to the units selected for a traverse. So if your survey units are feet and you are displaying distances in chains, vertical distances will be displayed in chains even though elevations will be displayed in feet (survey units).
Curves and Spirals
If you enter curve data, like a radius, arc length or tangent length, the appropriate factoring is applied so that they compute the correct grid coordinates but the distances themselves match the distance type of the traverse.
For example, if you have selected any Ground Distance type for the traverse, the radius and arc lengths displayed will be Ground Distance. The computed curve points like the PT (Point of Tangency) however, will be computed on the plane coordinate grid for your CRS.
In this way, any curve/spiral information can be displayed as a ground or geodetic distance and any curve/spiral points can be converted to an equivalent geodetic position for stakeout using GNSS.
Stationing
Stationing is always displayed in the distance type of the traverse. If you are displaying Grid Distance, then stationing will be in grid distance. If you are displaying Ground Distance (at project elevation), then stationing will be of that ground type. In this way, stationing will always match the accumulation of individual course distances displayed in the traverse view.
Recalling Points
When you recall points into a Traverse View, TPC inverses the grid coordinate distance or geodetic distance on the ellipsoid surface and factors it according to the distance type you have selected for that traverse. So you can have the traverse display any distance type you want.
Note:
You will want to consider the coordinates and geodetic positions of survey points as independent from the relationships displayed between them in TPC's views and COGO dialogs.
Coordinates are ALWAYS in the units of the survey (feet, meters, chains, etc).
Within a traverse, a drawing or a COGO routine, any distance or direction relationship can be displayed between any two survey points at any time.
Related Topics
Working with Units Choosing a Survey Grid Coordinate Distance Types Geodetic Distance Types Coordinate Reference System
Editions
Personal, Premium, Professional
|