TPC 2026
TPC 2026

 

 

Navigation: Traverses > Ground Traversing > Carrying Elevations in a Traverse >

Entering Instrument and Target Heights

 

 

 

 

You can carry elevations in a traverse by entering instrument and target heights.


Entering Instrument Heights

One way to carry elevations in a traverse is to establish elevations for your control points, then measure the height of the instrument above the control point at each occupied point.

•Choose View | Format View (or press [F9]) to display the Traverse View Format dialog.

•Add the letter 'I' to the display and editing sequences.

•Now enter the instrument height data for each occupied point.

The default instrument height for each new occupied point is zero.

Note: The elevation of the instrument is not displayed in the Traverse View. Only the elevation of the control point and the HI are displayed.


Entering Target Heights

•Choose View | Format View (or press [F9]) and add the letter 'T' to the display and editing sequences.

TPC subtracts the target height from the elevation of the target to get the elevation of the foresight point.

As you add points to a traverse, TPC copies the target height of the last traverse point into the appended point. As long as you don’t change the target height, you don’t have to edit it. If you do change the target height for a shot, just move the cursor to the HT field and enter the new value.


Negative Instrument Heights and Target Heights

In tunnels or underground mining operations, it is not uncommon to put control points and benchmarks in the ceiling. In these instances, you will need to use negative instrument and target heights. TPC allows negative numbers for both instrument heights and target heights.


Related Topics

Carrying Elevations in a Traverse

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.