TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing in TPC - It's Not CAD > Drawing Traverses > Labeling Traverse Lines >

Curve / Spiral Labels dialog

 

 

 

 

Edit the way TPC displays labels for curves and spirals.

Both curve and spiral formats are included in this dialog. TPC determines uses each based on the type (curve vs spiral) of each line segment.

Here are some examples of label formats.

Spiral Letters

For spirals, the letters R and 2 designate the beginning and ending radii of the spiral, while the letter A designates the spiral length and the letter K designates the spiral factor.

Formatting Labels

Use the letters defined at the bottom of the dialog to format the labels.

Multi-Line Labels

Both stacked and aligned labels can have multiple lines. Use the \ character to tell TPC where to place the line breaks.

Aligned

Specify the Format to use for Aligned curve and spiral label style.

Default Curve Format: B 'D='D 'LC='C|'R='R 'A='A

Default Spiral Format: 'R1='R 'R2='2 'Len'=A|'Delta='D 'K='K

Stacked

Specify the Format to use for Stacked curve and spiral label style.

Default Curve Format: B\\'LC='C\\'R='R\\'A='A\\'T='T\\'D='D

Default Spiral Format: 'R1='R\\'R2='2\\'Len'=A\\'Delta='D\\'K='K

Orientation

Select the orientation for the stacked labels. You can manually override the orientation of any stacked label via it's Properties dialog.

Alignment

Select the alignment for the stacked labels. You can manually override the alignment of any stacked label via it's Properties dialog.

TPC uses a special alignment called Auto Left/Right to automatically align text Left or Right, depending on which side of the labeled object it is on.  If you move the label from one side of the object to the other, the alignment will change automatically.

Additional Label Offset

TPC adds any offset you specify here to the drawing's label offset. Use this to position one group of labels farther from the line (i.e. record data in brackets [ ]).

Copy To Drawing Settings

Use this buttons to copy the formats displayed here to the drawing. These will become the default label formats for the drawing. This gives you an additional opportunity to use consistent labeling within a drawing.

Use Drawing Formats

Turn this on to

•copy the drawing's label format into this dialog

•remove any label formats stored with this traverse or point code, forcing it to use the drawing's corresponding label format instead.

This forces the drawing's label formats to be used by default.

When you turn this option off, TPC stores the current label formats with the traverse or point code, using the stored label to format labels for this traverse or point code.

Reset to Program Defaults

This option copies TPC's corresponding default label format into this drawing.

Use this option if you simply want to reset the label formats to the way they were when you first installed TPC.


Related Topics

Labeling Traverse Lines
Formatting Line Labels
Drawing Settings vs. Traverse Drawing Settings
Changing Control Point Settings
Horizontal Curves
Spirals

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.