|
TPC can also start a traverse with a two-point resection. You must measure the angle and distance to both resection points. If you have either the Premium or Professional editions, TPC can also create a resection from any number or points using a Least Squares Resection.
You can include the backsight as one of the resection points. The resection points must be inserted following the backsight point and must be clockwise from it.
If you measure the distance to the backsight, you can use the backsight as one of the resection points.
•Choose Edit | Append Resection. TPC will append an occupied point; backsight point and resection point to the traverse and move you to the new occupied point. Enter any description you want for the occupied point.
•Press [Enter] or the down arrow key to move to the backsight point.
•Enter the horizontal circle reading for the backsight (optional).
•Press [Enter] or the down arrow key to move to the resection point.
•Enter the measurement to the resection point.
•Choose Tools | Recompute to compute the position of the occupied point based on the resection.
Using Separate points for backsight and the resection
This feature is not included in the Property Edition.
At times, you will choose not to use the backsight for resection. It may be too far away, it may be a backsight you don’t typically measure, or you may have two resection points that are better than the backsight because they are closer. Whatever the reason, you can choose to use the backsight for just a backsight and two other resection points for the resection.
Using two separate resection points
This feature is not included in the Property Edition.
•Choose Edit | Append Resection. TPC will append an occupied point; backsight point and resection point to the traverse and move you to the new occupied point. Enter any description you want for the occupied point.
•Press [Enter] or the down arrow key to move to the backsight point.
•Sight the backsight and zero the horizontal circle.
•Press [Enter] or the down arrow key to move to the resection point.
•Enter the measurement to the first resection point.
•Press [Enter] or the down arrow key to move to the next point.
•If the point type is not RS, choose Type | RS=Resection.
•Enter the measurement to the second resection point.
•Choose Tools | Recompute to compute the position of the occupied point based on the resection.
Related Topics
Traverse View Entering Traverse Data Ground Traversing
Editions
Personal, Premium, Professional
|