|
Sometimes, you know the coordinates of the point you are occupying, but not the backsight point. In this case, you can enter a reference azimuth or bearing (the azimuth or bearing from the occupied point to the backsight). TPC will use the reference azimuth to orient the traverse.
If you don’t know the correct reference azimuth, you can enter an assumed azimuth. Later, when you find out the correct azimuth, enter it and choose Tools | Recompute. TPC will update the position of all the dependent traverse points based on the new reference azimuth.
Enter the occupied point and backsight information
•Enter the coordinates for the occupied point or recall an existing point.
•Press [Enter] or the down arrow key to move to the next point, the backsight.
•Move the cursor to the bearing or azimuth field and enter the reference bearing or azimuth. You do not need to enter a distance to the backsight.
•If the bearing or azimuth field is not displayed in the screen, you may need to scroll to the right, or press [F9] (or choose View | Format View) and add the letters “A” or “B” to the display sequence (A=North Azimuth, B=Bearing).
Note: If you enter both coordinates and a reference azimuth for the backsight, the coordinates will take precedence over the reference azimuth.
Starting at an Assumed Position
You may find yourself in the situation where you have field data for a traverse, but do not yet know the correct coordinates for the starting point or the correct orientation of the traverse.
With TPC, you can enter the traverse using assumed coordinates for the occupied point and backsight or assumed reference azimuth, compute the traverse points as you go and even check your closures in the case of a closed loop traverse. Later, when you have better information, you can enter the correct coordinates or reference azimuth and recompute the traverse by choosing Tools | Recompute. The result will be the same as if you had started with the correct information.
If you tie known points, either as side shots or traverse points, you can translate and rotate the traverse to the known points in order to properly orient it.
Related Topics
Traverse View Entering Traverse Data Ground Traversing
Editions
Personal, Premium, Professional
|