TPC 2026
TPC 2026

 

 

Navigation: Traverses > Creating Traverses >

Creating Traverses From COGO

 

 

 

 

Some COGO routines create traverses to hold their computations. When you station an alignment for instance, TPC creates a copy of the original alignment traverse and inserts the stations into it.

The following are some COGO routines that create traverses.

COGO | Right-Of-Way Offsets – you can include the offsets points that are created in the original traverse or you can create a new traverse to hold them. This is the preferred method if you are using this routine to create lot setbacks or highway right-of-way lines.

COGO | Stations and Offsets – TPC creates a copy of the original alignment and inserts the computed stations into the copy. The copy does not contain any raw data (bearings or distances) making the copy cleaner to work with.

COGO | Offsets to Alignments – This routine determines the stationing along an alignment where a selected point is perpendicular to that alignment. Points can then be referenced to that alignment by their station and offset. TPC creates a copy of the alignment and inserts both the station and the offset of each computed point.

COGO | Computing a Predetermined Area – This routine creates a new traverse for the area you specify and another optional traverse for the remainder. If you cut a one acre lot out of a four acre parcel, TPC will create the one acre traverse and a three acre traverse for the remainder. The three acre traverse can then be used to create additional lots.


Related Topics

Creating Traverses

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.