TPC 2026
TPC 2026

 

 

Navigation: Traverses > Ground Traversing > Using Data Sets >

Entering an Angle Set

 

 

 

 

To enter an angle set

•Highlight the foresight or side shot you want to enter the set for in the Traverse View.

•Choose Edit | Insert Set. TPC will insert the set records based on the type of set you selected and the number of sets you entered.

Point

Type

Data

1

 

 

2

BS

 

3

FS

 


The example shown here is a direction method (BFFB) set, where B1 and B2 are the normal and inverted backsight reading and F1 and F2 are the normal and inverted foresight readings.

B1=Normal backsight. (face 1)
B2=Inverted backsight (face 2)
F1=Normal foresight (face 1)
F2=Inverted foresight (face 2)

Point

Type

Data

1

 

 

2

BS

 

2

B1

 

3

F1

 

3

F2

 

2

B2

 

3

FSM

 


Notice that the letter ‘M’ is added to the mean FS type for point 3, indicating that the data is the “Mean” of a set.

Point

Type

Data

1

 

 

2

BS

 

3

F1

 

3

F2

 

2

B2

 

3

FSM

 



Combining the BS and B1 records

If a BS point type follows the occupied point and the BS point has horizontal circle data, the B1 record is not added. Additional sets to the same foresight or side shot will include the B1 record since the additional sets cannot share the BS point type.


Entering another set

•Highlight the FSM or SSM point.

•Choose Edit | Insert Set.

You can include as many sets as you like this way. Each additional set will repeat the set type selected in the program settings.

TPC combines each set to compute the mean. The means of each set are not displayed.


Field angle verses horizontal circle

Since BS, B1, B2, F1, F2 and F4 point types store measured data, they all display the horizontal circle, not the horizontal angle. In the Traverse View, the column heading is HA since the column contains both angles and circle readings.

Mean records (FSM and SSM) contain the computed mean horizontal angle, not the horizontal circle. This angle is turned from the BS point and is not dependent on the horizontal circle reading of the BS or B1 record. It is dependent only on the position or reference azimuth of the backsight.


Measuring the foresight

In any set, you must measure the normal foresight, but you may choose to record the inverted foresight instead of measuring it. TPC means the foresight distances if both the normal and inverted distances are measured.

Point

Type

Data

1

 

 

2

BS

 

3

FSM

 


Related Topics

Traverse View
Entering Traverse Data
Entering Side Shots
Displaying Raw Data
Recomputing a Traverse

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.