TPC 2026
TPC 2026

 

 

Navigation: Traverses > Traverse View > Formatting the Traverse View >

Traverse View Occupied Point Squence

 

 

 

 

The OP Sequence controls what point types are added to a traverse automatically following any occupied point. The first point in a traverse is always an occupied point but the OP Sequence determines what comes next. It is primarily used for ground traversing.

If you are entering data from a deed record, you will simply want to enter data from occupied point to occupied point. In this case, you want an OP Sequence of FS. 

If you are entering data for a topo and will be taking numerous sideshots from each occupied station, you would want BS/SS in the OP Sequence.  (Note that we have assumed that you will be entering a backsight to start.)

If you will be entering a field traverse or a meander with very few sideshots, BS/FS should work well.  (Again we assumed that you will use an initial backsight.)

The Traverse command initiates the OP Sequence.

Hints

The OP Sequence is not a critical element of the Traverse View Format. You can change a point type at any time so if you have an OP Sequence of BS/SS but don’t want any sideshots from the first occupied point, simply change the first sideshot to an occupied point in the Traverse View.

To learn more about changing point types in the Traverse View

See Traverse Point Types.


Related Topics

Formatting the Traverse View
Traverse View Formats
Traverse View
Traverse View Format - Decimals
Traverse View Format - Advanced
Traverse View predefined Formats

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.