TPC 2026
TPC 2026

 

 

Navigation: Traverses > Ground Traversing > Using Data Sets >

Direction Set Types

 

 

 

 

Direction sets use only the upper motion tangent screw. A direction set consists of a normal and inverted reading to the backsight and a normal and inverted reading to the foresight. The order of the readings is not important.

TPC allows two different repetition sets. Using the letters B for backsight and F for foresight, they are BFFB and BBFF.


BFFB

This is the classic “Direction” method. It is the preferred method for total stations without lower motion tangent. The sequence is:

•Enter the backsight data with the scope sighting the backsight point (you do not need to zero the gun on the backsight but most people do).

•In the normal scope position, release the upper motion and turn the scope to the foresight point, enter your field data for the shot to the foresight point [F1].

•Plunge the scope to the inverted position and re-sight the foresight. Record the data to F2.

Point

Type

Data

1

 

 

2

B1 or BS

 

3

F1

 

3

F2

 

1

B2

 

3

FSM

 


Using this method, the final backsight reading should be close to 180°. The amount that the final backsight differs from 180° is the error of the set.

Point

Type

Data

1

 

 

2

B1 or BS

 

2

B2

 

3

F2

 

3

F1

 

3

FSM

 


BBFF

This is a variation of the “Direction Method” used in underground mining and other operations where it is a real time saver to take both the normal and inverted backsights, then move to the foresight and take the normal and inverted foresights. The sequence is:

•Enter the backsight data with the scope sighting the backsight point [B1] (you do not need to zero the gun on the backsight but most people do).

•Plunge the scope to the inverted position and re-sight the backsight. Record the data to [B2].

•In the inverted scope position, release the upper motion and turn the scope to the foresight point, then enter your field data for the shot to the foresight point [F2].

•Plunge the scope to the normal position and re-sight the foresight. Record the data to [F1].

Remember, once the gun is set to the first backsight, only the upper motion is used to release and lock the horizontal circle.


Related Topics

Traverse View
Entering Traverse Data
Entering Side Shots
Displaying Raw Data
Recomputing a Traverse
Entering a Set

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.