TPC 2026
TPC 2026

 

 

Navigation: Traverses >

Inserting a Gap Into a Traverse

 

 

 

 

Traverse PC uses the sequence of points in a traverse to draw that traverse in a drawing.  See Drawing Traverses. 

The control points in a traverse use the Control Point Settings to Draw the Control Points of a traverse and create contiguous courses from one control point to the next. 

This is exactly what you want if you are drawing a house or pond on a map.  But what if you are drawing a ditch line that passes through a culvert under a drive way?  You don't want the ditch line to draw through the driveway.  Instead, you want to put a gap in that line so that it doesn't draw under the driveway.


Using GAP Points

TPC creates gaps with Gap points that you insert into a traverse to break the connection between any two control points.  Gap points can be inserted in a Traverse View or in a Drawing.


Creating a Gap to a Traverse

Select the traverse point at the end of the line where you want to insert the gap, then choose Edit, Create Gap in Drawing.

TPC will insert a GAP point above the selected traverse point and redraw the traverse in the Drawing View with the inserted gap.


Creating a Gap in a Drawing

Right click any traverse line or label and choose Gap.  TPC inserts a Gap point into the traverse and redraws the traverse with the gap.

See Inserting a GAP In a Drawing.


Related Topics

Inserting a GAP In a Drawing

 

 

 

Copyright © 2026 Traverse PC, Inc.